搜索结果: 1-11 共查到“知识库 工学 Test Results”相关记录11条 . 查询时间(0.125 秒)
Test Results of RTK and Real-Time DGPS Corrected Observations Based on NTRIP Protocol
GPS Real-Time DGPS RTK NTRIP Protocol Accuracy
2015/12/3
For many years, real-time DGPS and RTK correction data distribution have been providing GPS users a means to accomplish their tasks with high accuracy positioning in real-time. Dial-up systems over ph...
Airborne Testing of The Dss: Test Results and Analysis
Airborne Mapping Aerial Triangulation Direct Georeferencing
2015/7/15
In this paper, the Digital Sensor System (DSS) test results and analysis are presented. The DSS is a fully integrated fully digital
ruggedized system for airborne image acquisition, georeferencing, a...
Automatic Orientation and Merging of Laser Scanner Acquisitions Through Volumetric Targets: Procedure Description and Test Results
Laser scanning Orientation Mosaic
2015/7/14
The use of volumetric targets for the automatic merging and orientation of laser scanner acquisitions has been experimented. The
used procedure is fully automatic.
The targets can also be used for t...
Field Test Results for a Self-Calibrating Pseudolite Array
Self-Calibrating Pseudolite Array
2015/6/29
Pseudolites can extend the availability of GPS-type positioning systems to a wide range of applications not possible with satellite-only GPS. One such application is Mars exploration, where the centim...
The Integrity Monitor Testbed and Multipath Limiting Antenna Test Results
Monitor Testbed Multipath Limiting Antenna Test Results
2015/6/26
The Integrity Monitor Testbed (IMT) is a prototype of the Local Area Augmentation System (LAAS) Ground Facility (LGF). It is used to evaluate the integrity and continuity requirements on the LGF for C...
LAAS Position Domain Monitor Analysis and Test Results for CAT II/III Operations
LAAS Position Domain Monitor Analysis Test Results CAT II/III Operations
2015/6/26
The Local Area Augmentation System (LAAS) is a differential GPS navigation system being developed to support aircraft precision approach and landing with guaranteed accuracy, integrity, continuity and...
The Signal Quality Monitor (SQM) is an integrity monitor for the Wide Area Augmentation System (WAAS). The monitor detects L1 signal waveform deformation of a GPS or a Geosynchronous (GEO) satellite m...
A Consideration on Nonlinear Component of Maneuvering Hydrodynamic Force from Segmented Model Test Results—Effect of Shallow Water—
Maneuverability Hydrodynamic Force Nonlinear Component Segmented Model Shallow Water
2009/5/12
This report presents some experimental results of maneuvering hydrodynamic forces obtained from segmented model tests at finite water depth. The experiments were carried out in order to make clear the...
A Consideration on Nonlinear Component of Maneuvering Hydrodynamic Force from Segmented Model Test Results-Hydrodynamic Force on Ship Hull in Turning Motion
Maneuverability Hydrodynamic Forces Nonlinear Component Segmented Model Turning Motion
2009/5/12
In order to clarify availability of the so-called cross-flow model, some model experiments on longitudinal distribution of lateral force on a ship hull were carried out with the segmented model. Later...
Gas-condensate well test results interpretation at Helang field
well test analysis gas condensate reservoir condensate build-up
2009/5/7
Gas condensate reservoirs exhibit a complex behavior caused by the existence of two-fluid system, reservoir gas and liquid condensate, around the well when bottomhole pressure drops below the dew poi...
Investigation on Correlation Lines through the Analyses of Geosim Model Test Results
Correlation Lines Geosim Model Test Results
2009/4/9
The present paper, at first, presents the author's understanding of the problem caused by the use of ITTC (International Towing Tank Conference) 1957 Line in conjunction with three-dimensional analysi...