搜索结果: 1-7 共查到“材料的组织、结构、缺陷与性能 steel”相关记录7条 . 查询时间(0.067 秒)
Effect of heat treatment on mechanical properties of H11 tool steel
Tool steel Heat treatment Hardening
2009/12/14
Purpose: AISI H11 is a special alloy steel, categorized as chromium tool steel. Because of its high toughness and hardness, it is well suited for hot work applications involving very high loads. Typic...
The structure and properties of steel with different pearlite morphology and its resistance to abrasive wear
Abrasive wear Block sections Switch Pearlite morphology Isothermal annealing
2009/12/2
Purpose: The analyse of pearlite morphology changes as a result of hot rolling process and isothermal annealing.
Design/methodology/approach: Physical modelling of isothermal annealing for a transiti...
Mechanical and tribological properties of the surface layer of the hot work tool steel obtained by laser alloying
Surface treatment Laser alloying and remelting Hot work alloy tool steel
2009/12/1
Purpose: The paper presents results on the mechanical and tribological properties examinations of the X40CRMoV5-
1 hot work alloy tool steel alloyed with carbide powders using the high power diode la...
The influence of hot-working processing on plasticity and structure of duplex steel
Superplastic materials Plastic forming Microstructure
2009/12/1
Purpose: There are numerous branches of industry where the (α+γ) duplex steels have not yet been sufficiently
popularised due to problems with their forming, resulting from different properties of t...
Model and numerical analysis of mechanical phenomena of tools steel hardening
Quenching Tool steel Thermo-elestic-plastic finite element analysis
2011/4/2
This paper the model hardening of tool steel takes into considerations of mechanical phenomena is presented. Fields stresses and strains are obtained from solutions by FEM equilibrium equations in rat...
Heat treatment of long term serviced Cr–Mo cast steel
Heat Treatment Mechanical Properties Cr–Mo Cast Steel
2011/4/2
The paper presents results of research on the influence of heat treatment on the structure and properties of L20HM cast steel after long term operation at elevated temperature. Investigated cast steel...
Structure and properties of gradient tool materials with the high-speed steel matrix
Tool materials Uniaxial pressing Sintering
2010/2/9
Purpose: This work concerns research on the structure and properties of gradient tool materials with the HS6-5-2 high-speed steel matrix reinforced by the tungsten carbide.
Design/methodology/approac...