搜索结果: 1-13 共查到“材料科学基础学科 heat”相关记录13条 . 查询时间(0.109 秒)
2017年纳米热传输研讨会（Symposium NM2—Nanoscale Heat Transport—From Fundamentals to Devices）
2017年 纳米热传输 研讨会
2017/3/10
Fundamental length scales such as the mean free path and the wavelength of energy carriers – e.g. electrons, phonons or photons - fall in the range of 1 – 10000 nm with corresponding average lifetimes...
西安交通大学工程材料基础课件Chapter3 HEAT TREATMENT OF STEEL
西安交通大学 工程材料基础 课件 Chapter3 HEAT TREATMENT OF STEEL
2014/7/25
西安交通大学工程材料基础课件Chapter3 HEAT TREATMENT OF STEEL。
Effect of heat treatment on the microstructure, hardness and abrasive wear resistance of high chromium hardfacing
destabilized austenite carbide dry rubber wheel test factorial regression GMAW toughness
2014/2/24
The effect of destabilization heat treatment on the microstructure, hardness, fracture toughness and abrasive wear
resistance of high chromium hardfacing was investigated. The results from the study...
Effect of heat treatment on mechanical properties of H11 tool steel
Tool steel Heat treatment Hardening
2009/12/14
Purpose: AISI H11 is a special alloy steel, categorized as chromium tool steel. Because of its high toughness and hardness, it is well suited for hot work applications involving very high loads. Typic...
华南理工大学材料科学与工程导论课件Lecture-7 Heat treatment of steels & cast irons
华南理工大学 材料科学与工程导论 课件 Lecture-7 Heat treatment steels & cast irons
2009/12/7
华南理工大学材料科学与工程导论课件Lecture-7 Heat treatment of steels & cast irons。
华南理工大学材料科学与工程导论课件Lecture-6 Materials strengthening by multiphase, Phase transformation & heat treatment
华南理工大学 材料科学与工程导论 课件 Lecture-6 Materials strengthening multiphase Phase transformation heat treatment
2009/12/7
华南理工大学材料科学与工程导论课件Lecture-6 Materials strengthening by multiphase, Phase transformation & heat treatment。
Influence of initial heat treatment on the fatigue life of austenitic Fe–Ni alloy
Fatigue Metallic alloys Heat treatment Structure
2009/12/2
Purpose: The paper addresses the problem of determining the dependence between initial heat treatment of an
austenitic Fe–Ni alloy and its mechanical properties and fatigue life at room temperature.
...
Influence of the heat treatment on the mechanical properties and structure of TWIP steel in wires
Metallic alloys Drawing process Austenitic steel
2009/12/1
Purpose: The aim of this paper is to determine influence of the drawing process of TWIP steel wires on their
mechanical properties and the structure changes.
Design/methodology/approach: The heat t...
Heat treatment of long term serviced Cr–Mo cast steel
Heat Treatment Mechanical Properties Cr–Mo Cast Steel
2011/4/2
The paper presents results of research on the influence of heat treatment on the structure and properties of L20HM cast steel after long term operation at elevated temperature. Investigated cast steel...
Effect of the concentrated heat flow treatment on the structure and the antiwear properties of cast iron
GTAW method eutectic martensite strengthening wear resistance relaxation
2011/3/30
The influence of modes of surface fusion by electric arc plasma (GTAW method) on the hardness and wear-resistance of plain cast iron was studied. A possible mechanism of structural rearrangement in th...
Effect of the concentrated heat flow treatment on the structure and the antiwear properties of cast iron
GTAW method eutectic martensite strengthening wear resistance relaxation
2011/3/30
The influence of modes of surface fusion by electric arc plasma (GTAW method) on the hardness and wear-resistance of plain cast iron was studied. A possible mechanism of structural rearrangement in th...
Influence of heat treatment on changes on structure and magnetic properties of CoSiB alloy
Amorphous materials Electrical properties and magnetic properties Heat treatment annealing
2010/2/8
Purpose: This paper describes influence of heat treatment on changes on structure and magnetic properties of the amorphous Co77Si11.5B11.5 alloy.Design/methodology/approach: The following experimental...
The relationship between specific heat capacity and oxidation resistance of TiAl alloys
Corrosion Oxidation resistance Specific heat capacity Intermetallics TiAl
2010/2/22
Purpose: The results of the measuring of the specific heat capacity of the TiAl-based alloys with the addition of Cr and Nb, in temperatures ranging from 150°C to 1000°C.
Design/methodology/approach:...