搜索结果: 1-6 共查到“木材加工与人造板工艺学 temperature”相关记录6条 . 查询时间(0.315 秒)
Relationships between Internal Cracks and Strains during High Temperature Drying of Sugi Boxed-Heart Square Timbers
high temperature drying strain gauge internal crack internal strain tensile stress
2009/3/6
Internal strains in sugi (Cryptomeria japonica D. DON) boxed-heart square timbers were measured by using strain gauges during high temperature drying above 100°C. We discuss relationships between inte...
Variation in Moisture Content of Sugi Boxed Heart Timber in Miyazaki Prefecture during Kiln Drying under High Temperature and Low Humidity II
sugi kiln-dry high temperature moisture content internal check
2009/3/6
Sugi (Cryptomeria japonica D. Don) boxed heart timbers from Miyazaki prefecture were kiln-dried at low humidity under two high-temperature conditions. The distribution of moisture content, changes in...
Mechanical Properties of Wood in an Unstable State due to Temperature Changes, and an Analysis of the Relevant Mechanism II
wood block uniform elimination lignin hemicellulose
2009/3/6
In order to prepare wood specimens for subsequent measurements of mechanical properties, we examined the selective and uniform elimination of wood constituents from a 4 mm thick cross section of hino...
Mechanical Properties of Wood in an Unstable State due to Temperature Changes, and an Analysis of the Relevant Mechanism I.
quenching swollen wood variations of temperature stress relaxation fluidity
2009/3/6
To study mechanical properties of wood exposed to variations of temperature, in this study the swollen wood (water-swollen wood & ethylene glycol-swollen wood) was preheated at 30-180°C and quenched t...
Mechanical Properties of Wood in an Unstable State due to Temperature Changes, and Analysis of the Relevant Mechanism V.
quenching thermal expansion thermal decomposition destabilization
2009/3/6
In order to define the effects of thermal expansion and thermal decomposition on the destabilization of quenched wood, we measured the stress relaxation of steam-treated wood and oven-dried wood under...
Simulation of the Drying Process Using Temperature in Wood as Calculated from Moisture Content
diffusion coefficient finite difference method wet-bulb temperature
2009/3/4
The three-dimensional diffusion equation was solved by the finite difference method, and then the moisture content of structure lumber during drying was calculated. The moisture content was converted...