工学 >>> 力学 农业工程 林业工程 工程与技术科学基础学科 测绘科学技术 材料科学 矿山工程技术 石油与天然气工程 冶金工程技术 机械工程 光学工程 仪器科学与技术 动力与电气工程 能源科学技术 核科学技术 电子科学与技术 信息与通信工程 控制科学与技术 计算机科学技术 化学工程 纺织科学技术 印刷工业 服装工业、制鞋工业 轻工技术与工程 食品科学技术 土木建筑工程 水利工程 交通运输工程 船舶与海洋工程 航空、航天科学技术 兵器科学与技术 环境科学技术 安全科学技术 工业设计
搜索结果: 1-15 共查到工学 Thermal conductivity相关记录22条 . 查询时间(0.125 秒)
Creating polymers that exhibit a switchable thermal conductivity requires a fundamental understanding of how polymer structure and inter- and intramolecular interactions influence thermal transport. T...
The dispersion stability and thermal conductivity of propylene glycol based nanofluids containing Al2O3 and TiO2 nanoparticles were studied in the temperature range of 20 to 80 {\deg}C. Nanofluids wit...
Numerical investigations are conducted to study the effect of factors such as particle clustering and interfacial layer thickness on thermal conductivity of nanofluids. Based on this, parameters inclu...
Abstract: In this letter we investigate thermal conductions in mass-graded graphene flakes by nonequilibrium molecular dynamics simulations. It shows mass-graded graphene flakes reveal no thermal rect...
Thermal conductivity is one of the key parameters in the figure of merit of thermoelectric materials. Over the past decade, most progress in thermoelectric materials has been made by reducing their th...
Purpose: In this study we report measurements of effective thermal conductivity by using 3ω method and effective viscosity by vibro-viscometer for SiO2-water and Al2O3-water nanofluids at different p...
微热探针法测试热导率系统已被广泛应用于食品材料热导率的测试中。但是,由于实验条件或实验设备的限制,基于理想的线热源瞬态模型测量原理得到的结果会产生某些测试误差。针对测试误差,从探针输入电压、加热时间和样品的径向尺寸等装置操作参数的选择着手,通过实验,得到装置系统测定中输入电压的最佳值为2.5~6.5V、加热时间最佳值为20~50s。最后通过实际测试,得到了番茄果实在不同成熟阶段的热导率变化规律。
Thermal Barrier Coatings (TBCs) were first successfully tested in the turbine section of a research gas turbine engine in the mid-1970s. By the early 1980s they had entered revenue service on the vane...
For a thorough understanding of the behaviour of foundry mould mixtures, a good knowledge of thermal properties of mould materials is needed. Laboratory determination of thermal conductivity of mould...
The aim of the paper is to describe how inexpensive/simple physics equipment was fabricated and used in the determination of thermal conductivity of rock samples. We used the experimental techniques k...
The major aim of comfort research is to find the comfort temperature for an individual or group. This subjective property can be evaluated by means of thermal conductivity as a physical characteristic...
Radiation heat transfer is found to be the dominant mode of heat transfer at temperatures higher than 400-500K [11]. Convection heat transfer being negligible in nonwovens, effective thermal conductiv...
The thermal conductivity of eight kinds of liquid foods of total solid content between 10 and 60wt% was measured by a transient heat flow method using twin probes at temperatures ranging from 10 to 50...
We have proposed a novel model of thermal conductivity in various optical materials. This numerical model for thermal conductivity requires one material parameter for isovolumic specific heat and two ...
A novel method has been developed to measure the thermal conductivity of leaf-like material (tobacco) in the perpendicular direction to its surface over broad ranges of temperature and moisture with t...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...