搜索结果: 1-9 共查到“工学 injection-moulding”相关记录9条 . 查询时间(0.055 秒)
Application of powder injection moulding and extrusion process to manufacturing of Ni-YSZ anodes
Composites Powder metallurgy Sintering
2009/12/14
Purpose: Investigation of the Ni-YSZ cermets for anode supported solid oxide fuel cells (SOFC) prepared by extrusion or powder injection moulding process, sintered and reduced of NiO-YSZ.
Design/meth...
Effect of multiple injection moulding on some properties of polycarbonate
Engineering polymers Multiple injection moulding Recycling
2009/12/3
Purpose: The aim of this work was to investigate the influence of multiple (up to 6 times) injection moulding of polycarbonate (PC) on some properties of the obtained moulded pieces. The investigation...
Expectation of the parts quality on the ground the simulation of the injection moulding process
Institute of Polymers Processing and Production Managements, Czestochowa University of Technology
2009/12/2
Purpose: The aim of this paper was to present results of researches concerned to predestining quality of polymer parts created by injection moulding method. The estimation of structural solution quali...
Influence of the method of heating/cooling moulds on the properties of injection moulding parts
Engineering polymers Working properties of materials and products Crystallinity
2009/12/2
Purpose: The main purpose of carry out research was estimate the influence thermal conditions of the mould on
properties of injection moulded parts.
Design/methodology/approach: The properties of st...
Polymer composite strengthening by developed injection moulding technique
Engineering polymers Composites Injection moulding
2009/12/2
Purpose: This work presents method of mechanical strengthening of nanoreinforced polymer and immiscible polymer
blends of polypropylene (PP) and polycarbonate (PC) obtained by non-conventional inject...
Preparation of Homogeneous Feedstocks for Injection Moulding of Zirconia-Based Ceramics
Feedstock Mixing Injection Moulding Zirconia
2009/10/13
In this study, a new method for preparing homogeneous feedstocks for injection moulding of ZrO2
ceramics was developed and explained in detail. Mixture homogeneity on a large scale was assessed by me...
A Review of the Effect of Moulding Parameters on the Performance of Polymeric Composite Injection Moulding
Injection moulding Simulation Fibre orientation Mold flow analysis
2009/10/10
A review of the e ect of changes in moulding parameters on polymeric composite injection moulding is presented in this paper. The emphasis of this work is on the use of short bre reinforced polymer c...
Experimental and Theoretical Investigations of Mouldability for Feedstocks Used in Powder Injection Moulding
Mouldability Feedstocks Powder Injection Moulding
2009/9/4
Experimental and theoretical analyses of mouldability for feedstocks used in powder injection moulding are performed. This study covers two main analyses. (i) The experimental analysis: the barrel tem...
Selected methods of modelling of polymer during the injection moulding process
Computer assistance in the engineering tasks and scientific research Monitoring of polymer flow during injection molding process Mold flow analysis
2010/2/10
Purpose: The purpose of present paper was presenting chosen results of investigations on polymer flow during mould cavity filling phase of injection process. Advancement in the simulation software mak...