搜索结果: 1-15 共查到“工学 Titanium”相关记录49条 . 查询时间(0.162 秒)
Titanium is a language and system for high-performance parallel scientific computing. Titanium uses Java as its base, thereby leveraging the advantages of that language and allowing us to focus attent...
Sulfuric acid recovery from titanium white (pigment) waste liquor using diffusion dialysis with a new series of anion exchange membranes—static runs
Ion exchange membrane Diffusion dialysis Titanium white waste liquor Poly(2,6-dimethyl-1,4-phenylene oxide)
2016/3/25
In this paper, a new series of anion exchange membranes have been produced from linear engineering plastics poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) by conducting the processes of bromination, chl...
New ‘High-Entropy’ Alloy Is As Light As Aluminum, As Strong as Titanium Alloys
High-Entropy As Light As Aluminum As Strong as Titanium Alloys
2014/12/30
Researchers from North Carolina State University and Qatar University have developed a new “high-entropy” metal alloy that has a higher strength-to-weight ratio than any other existing metal material....
Nanocrystalline titanium dioxide catalyst for the synthesis of azlactones
Nanocrystalline titanium dioxide Electrochemical reduction method Cyclodehydration-condensation Heterogeneous catalyst
2014/3/9
Titanium dioxide nanoparticles were prepared by a electrochemical reduction method using parameters such as current density, solvent polarity, distance between electrodes, and concentration of stabili...
Titanium Dioxide Nanoparticles Catalyzed Synthesis of Hantzsch Esters and Polyhydroquinoline Derivatives（图）
titanium dioxide nanoparticles Hantzsch reaction 1,4-dihydropyridine polyhydroquinoline
2013/10/5
1,4-Dihydropyridine and polyhydroquinoline derivatives have been prepared efficiently in a one-pot synthesis via Hantzsch condensation using nanosized titanium dioxide as a heterogeneous catalyst. The...
Radioactivity in Surface Soils Around the Proposed Sites for Titanium Mining Project in Kenya
Radioactivity Measurements Titanium Mining Absorbed Dose Rates Natural Background Radiation
2013/3/12
Radioactivity measurements were carried out around Maumba and Nguluku villages, two of the proposed sites for titanium mining in the coastal area of Kenya. Samples of surface soils were analyzed using...
Preparation and Characterization of Titania Nanoparticles from Titanium Tetrachloride and Titanium Sulfate Flocculation of Dye Wastewater
Dye wastewater Flocculation Titanium dioxide Titanium tetrachloride Titanium sulfate Sludge utilization
2010/9/8
Titanium dioxide (TiO2) is the most widely used metal oxide for environmental applications, cosmetics, paints, electronic paper and solar cells, so demand is increasing rapidly. TiO2 can be produced f...
Mechanical properties of ultra-fine grain titanium
Mechanical properties ultra-fine titanium
2010/8/12
It is required that a material for dental implants is bio compatible, it must not be toxic and it may not cause allergic reactions [1]. It must have high ultimate strength Rm and yield value Rp0,2 at ...
The 12th World Conference on Titanium
The Nonferrous Metals Society The 12th World Conference Titanium
2010/4/7
The 12th World Conference on Titanium (Ti-2011) is the 12th in a series of meetings held every four years since 1968, with purpose of bringing together the worldwide titanium community to present and ...
The influence of initial plastic deformation on microstructure and hot plasticity of α+β titanium alloys
Titanium alloys Thermomechanical process Hot deformation Heat treatment β-solution
2010/8/17
Two phase titanium alloys most often are hot deformed, mainly by open die or die forging. Achievement of desired mechanical properties is related to development of proper microstructure in plastic wor...
The 12th World Conference on Titanium will be Hosted by The Nonferrous Metals Society of China
in June 19-25.Conference Topics;1. Extractive metallurgy;Wrought processing and so on.
The 12th World Conference on Titanium Beijing, China June 19-25, 2011 organized by The Institute of Materials, Minerals and Mining, UK,The Minerals, Metals and Materials Society (TMS),USA and The Ame...
Influence of workpiece inclination angle on the surface roughness in ball end milling of the titanium alloy Ti-6Al-4V
Machining Ball end milling Workpiece inclination angle
2009/12/14
Purpose: The aim of this work is to provide an in-depth understanding of the surface texture produced by various workpiece inclination angles using high speed finish ball end-milling of the titanium a...
Laser nitriding of the surface layer of Ti6Al4V titanium alloy
Metallic alloys Microstructure Wear resistance
2009/12/2
Purpose: The purpose of this paper is modification of the surface layer of the Ti6Al4V titanium alloy
microstructure and properties by laser remelting in nitrogen atmosphere.
Design/methodology/appr...
Superplasticity studies in a beta titanium alloy
Superplasticity Dynamic recrystallization Beta titanium
2009/12/1
Purpose: In the present study, the Superplastic Forming and deformation behavior as well as related mechanisms
of this titanium alloy were investigated.
Design/methodology/approach: The high tempera...